您现在的位置  首页 >> 代理贸易业务 >> Apiste PAU精密空调 >> PAU精密空调 >> [ PAU-800RW ]

产品名称:PAU-800RW
产品型号:PAU-800RW
上传时间:2012-06-01
点击次数:8257

   

产品规格型号 Specification
产品规格型号 Model PAU unit
安装方式 Type PAU-800RW
性能 Performance 温度控制范围 Temperature control range -5 to 65
温度控制精度 Temperature control accuracy(K) ?.5
制冷功率 Cooling capacity(W) 600(At ambient temperature of 25篊?
允许环境温度 Allowable ambient temperature 20 to 30(Operational temperature range 15 to 45)
允许环境湿度 Allowable ambient humidity(%) 10 to 85
外观 Appearance 体积 Outside dimensions(mm) H1245×W400×D700
重量 Weight(kg) 85
Blower duct joint diameter(mm) ?5
电源 Electrical
characteristics
电源 Power supply 1 phase 100V 50/60Hz
电流 Operating current(MAX)(A) 18.5/19.0
电机功率 Power consumption(MAX)(W) 1900/1950
组成装置 Components 压缩机 Compressor Rolling piston rotating type
Condenser, Cooler Fin and tube
Heater Sheathed heater with fin (1000W)
Blower air discharge rate
(m3/min)
(For cooler)
Sirocco fan
1.6/1.8
(For condenser)
Axial fan
4.0/4.7
Coolant controller Capillary tube
Temperature sensor Thermocouple(Type K)
Temperature control Electronic digital setting indicating PID control
Protective
device
Compressor Overcurrent relay(Manual reset)Surge absorber
Motor protector(Automatic reset)
Heater Overheat protection thermostat(100篊, OFF)
Thermal fuse(119篊)
Blower fan(For cooler) Surge absorber
Main circuit Ground-fault circuit breaker

Note:
Temperature setting range:
These values are obtained at the air discharge port of the PAU unit in a surrounding environment of 25篊/40% RH. The PAU unit may not offer the rated temperature control accuracy depending on the ambient temperature/humidity.

Blower air discharge rate:
This unit is not provided with a blower fan motor. When using this unit, be sure to connect the FFU. When the airflow in the FFU is insufficient, the EMERGENCY lamp illuminates.
Make sure that you do not excessively reduce the volume of the evolving airflow to prevent freezing. (For more information, please contact our sales representative.)

Cooling capacity:
These values are obtained in a surrounding environment of 25篊/40% RH.

Allowable ambient temperature:
Performance does not cover all temperature control ranges.

*This unit should basically be provided with a heat-insulating hose + internal circulation. Take a heat insulation measure for the target enclosure.

*Switch the cooler to the dehumidifier mode every 30 minutes.
[打印]  [关闭窗口]  

Warning: Unknown: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in Unknown on line 0