您现在的位置  首页 >> 代理贸易业务 >> Apiste ENC电气柜空调 >> ENC电气柜空调 >> [ ENC-G2200L ]

产品名称:ENC-G2200L
产品型号:ENC-G2200L
上传时间:2014-02-10
点击次数:8215

   

产品规格型号(Specification)

产品规格型号[Model]

ENC-G2200L
安装方式[Type] Lateral mount type(侧装式)
制冷方式[Cooling scheme] Compressor(压缩机制冷)
制冷功率[Cooling capacity](W) 2000/2200 (50/60Hz)

电源[Power supply] (50/60Hz)

3 phase 200VAC±10%
电流[Current consumption] (A)(MAX) 4.4/4.1
启动电流[Starting current] (A) 27/25
电机功率[Power consumption] (W)(MAX) 1100/1200
允许环境温度[Allowable ambient temperature] (oC) 20 to 55
允许环境湿度[Allowable ambient humidity] (%) 10 to 85 (No condensation)
制冷剂[Refrigerant] R-134a  570g (A kind of freon that is not prohibited)
温度[Temperature control range](oC) 20to 45
风机[Number of fans] 4
输出[Output] Output of operation & alarm(250V 2A)
显示[Display]
LED Temperature/Error RUN
抗噪音水平[Noise immunity]
Level 4 in the fast transient/Burst immunity test
噪音值[Noise] (dB) Approx. 68/72
振动[Vibration resistance] Vibration frequency : 5Hz ; a double amplitude of 20mm
颜色[Paint color] Munsell 5Y7/1 Equivalent color of light beige
体积[Outer dimensions] (mm) H1200×W450×D230
重量[Weight](kg) 48

Note:

Cooling capacity:
Rated value at an ambient temperature of 35ºC and an internal temperature of 35ºC (Measured according to the enthalpy method in JIS-C-9612)
Rated value:
Measured under an ambient temperature of 35ºC and a relative humidity of 40%
Maximum value:
Measured under the highest allowable temperature ambient temperature and a relative humidity of 40%
Allowable ambient temperature:
When you use an FA cooler continuously at an ambient temperature below 15-20ºC in low temperature periods, turn off the power supply whenever possible, because there is possibility of compressor being operated under high load.
[打印]  [关闭窗口]  

Warning: Unknown: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in Unknown on line 0